MEP Coordination

Mechanical, electrical, and plumbing scopes all touch concrete before they touch anything else. Underground electrical conduit, plumbing sleeves, floor boxes, and grounding grids all get set or poured into place before a slab ever cures, and getting that sequence wrong means demolition and rework that nobody wants to pay for. We coordinate MEP subcontractor scopes on the commercial and industrial projects we self-perform concrete for throughout the DFW Metroplex, so underground and embedded work lands correctly the first time.

This is coordination, not self-performance. We're not licensed electricians or plumbers, and we don't pretend to be. What we do is manage the interface: reviewing MEP drawings before every pour, walking the site with the electrical and plumbing subcontractors to confirm sleeve and conduit locations, and holding the pour schedule until embeds are set correctly. On a distribution center or manufacturing building, that might mean dozens of floor boxes, trench drains, and underground conduit runs that all have to be right before the slab goes down, because there's no fixing a missed sleeve after 40,000 square feet of concrete has cured.

Grapevine and the Mid-Cities corridor have seen a wave of build-to-suit and spec industrial development in the last several years, much of it requiring heavier electrical service than older buildings were designed for — manufacturing equipment, EV charging infrastructure, and data-heavy distribution operations all push MEP loads higher. We coordinate with the design team and MEP subcontractors early enough that underground rough-in isn't an afterthought squeezed in before a pour deadline.

We take this on as part of our self-perform concrete scope, whether we're a subcontractor to a general contractor managing the full MEP package or working directly with a property owner who needs one accountable partner handling the concrete-MEP interface.

This coordination scope shows up on projects of every size we touch, from a single equipment pad and conduit run on a small commercial build near Main Street to a full underground utility and electrical rough-in package on a 200,000 square-foot distribution building near DFW Airport. The stakes scale with the project, but the principle doesn't change: the sleeve, embed, or conduit run has to be right before the concrete goes down, because there's no efficient way to fix it after.